6in, 20-50 HP, 3 Point Hydraulic Wood Chipper For Tractors , WC68H

Required PTO HP 20 - 50HP Flywheel Housing System Easy To Open Clamshell Chipping Diameter 6in Flywheel Housing Thickness 0.3in In-feed Chute Opening 25.6 x 25.2 in Flywheel Shaft 2in In-feed Opening 6 x 8in Hydraulic Oil 5.3 gal of ISO 32 or ISO 46 (warmer climates) In-feed Chute Quick folding for transport/storage Hydraulic Pump Yes - Belt Driven In-feed System Self Contained Hydraulic System Discharge Chute 360 Degree Swivel In-feed Drive Forward/Neutral/Reverse with Variable Speed: (0-75 ft/min) PTO Shaft Shear Pin Protected PTO Shaft Included In-feed Roller Size 8in Chisel Tooth PTO Shaft Length T4/31.1-38.3 in In-feed Roller Pressure Adjustable via Spring Tension Number of Blades 4 Reversible Blades Quick Hitch Compatible Cat 1 Quick Hitch Finish Powder Coat Paint 3 Point Hitch CAT1 Warranty 1 Year Flywheel Speed 540 RPM Dimensions (L x W x H) 45x33x45 in Flywheel Drive System Direct Drive Net Weight 695 lbs Flywheel Diameter 24in Gross Weight 882 lbs Flywheel Thickness 0.75in WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.