3-Point PTO Stump Grinder & 60'' PTO Flail Mower Combo，SG24&EFS60

3-Point PTO Stump Grinder Flywheel Diameter 24 in Mounting 3 Point Hitch Cat. 1 (Quick Attach Compatible) Flywheel Thickness 3/4 in PTO Input 540 RPM Carbid Tip 34 PCS Max. Torque 1200 N·m Carbid Tip Material YG11C PTO Shaft Weight 44 LBS Tip Holder Material 42CrMo Dimensions 29 × 37 × 38 in PTO HP Required 15–45 HP Packing Iron Frame + Carton PTO Shaft (Included Shipping) 1-3/8” 6 Spline Tractor and Implement Ends PTO Driveline Shaft with Slip Clutch Weight (N.W/G.W.) 450/563 LBS Friction Torque Limiter (Slip Clutch) Included 60'' PTO Flail Mower Engine Power Required 15-35HP Drive Type Belt drive Working Width 60in Number of Belts 3 Overall Width 65in Belt Size V Belt 13 X 1041 Blade Ground Clearance 0.6in-1.8in Drive Belt Tensioner Yes Max. Cutting Diameter Depends On The Type Of Grass Deck Thickness 0.16in Number Of Blades 24 Side Plate Thickness 0.24in Blade Type Hammer PTO Shaft RPM 540 RPM Size Of Blades 3.5 X 3 X 1.6in Driveline Shaft Length T5-LF-31 with shear bolt ；31- 43in Blade Weight 0.8lbs Spline End 1.375in z6 Blade （Tines）Material Cast Steel 3-Point Hitch CAT 1 Rotor Bearing SKF bearing Tractor Mount Reversible Rotor Diameter 3in Gearbox Oil Type 85W-90 Rotor Swing Diameter 11in Dimensions (L x W x H) 65 x 30 x 28in Rotor Thickness 0.3in Finsh Powder Coat Paint Galvanized Steel Rotor Shaft Speed 2958 rpm Warranty 1 year Blade Speed 142 ft/s Weight (N.W./G.W.) 406/503 lbs WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.