3-Point PTO Stump Grinder & 4" PTO Wood Chipper & Forestry Log Skidding...

3-Point PTO Stump Grinder Flywheel Diameter 24 in Mounting 3 Point Hitch Cat. 1 (Quick Attach Compatible) Flywheel Thickness 3/4 in PTO Input 540 RPM Carbid Tip 34 PCS Max. Torque 1200 N·m Carbid Tip Material YG11C PTO Shaft Weight 44 LBS Tip Holder Material 42CrMo Dimensions 29 × 37 × 38 in PTO HP Required 15–45 HP Packing Iron Frame + Carton PTO Shaft (Included Shipping) 1-3/8” 6 Spline Tractor and Implement Ends PTO Driveline Shaft with Slip Clutch Weight (N.W/G.W.) 450/563 LBS Friction Torque Limiter (Slip Clutch) Included 4" PTO Wood Chipper Tractor Power 18-45HP Blade (Tines) Material 4CrW2Si Max. Throughput Capacity 4 in PTO Shaft RPM 540 RPM Infeed Opening 4*10 in Flywheel Speed 540 RPM lnfeed Chute Opening 20*20 in Drive Type PTO Feeding Opening Gravity Feed Driveline Shaft Length T5-LF-31 in with shear bolt, 31.5-43 in Discharge Chute Rotation 360 Degrees 3-Point Hitch CAT 1 Rotor Diameter 25 in Dimensions (L x Wx H) 38x 33x 43 in Rotor Thickness 0.5 in Finsh Powder Coat Paint Galvanized Steel Rotor Weight 82 lbs Warranty 1 year Number Of Blades 4+1 Net Weight 397 lbs Blade Weight 0.9 lbs Gross Weight 441 lbs Forestry Log Skidding Winch Recommended Tractor Power 25-60hp Pulling Capacity 8800lbs Winch Type Mechanical, Dry Disc Clutch Average Winching Speed 180 ft/minute Cable Length 200 ft Cable Diameter 3/8 in Cable Type Steel Tractor CAT CAT 1 PTO Input Speed 540 RPM PTO Shaft 1-3/8in 6 Spline Tractor， With Shear Bolt Dimensions 47 X 20 X 71 in Packing Size 49 x 21 x 73 in Weight (N.W/G.W.) 602/659 lbs WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.